How To Remove Towels With Baking Soda – The Best Way To Get Cleaner, Softer Towels

0

Hot cleaning your towels is enough to keep them looking clean, but there’s still a lot of hidden dirt that can linger in the soft fibers. Stripping laundry is the best way to get rid of deep-seated dirt, grime, and other grime your washing machine may miss, but how can you do it using just baking soda and water? Here’s how to strip your towels for clean, soft results.

Laundry stripping is a deep soaking method that slowly drains built-up residue and dirt from everything from your clothes to your towels.

Detergents, oil, hard water and other substances can all contribute to the hidden dirt lurking in these items, which is why washing them in your machine alone just isn’t enough for a clean. in depth.

Stripping your towels will make them both cleaner and even softer than before by restoring the fluffy fibers, and all you need is three simple ingredients.

READ MORE: Woodstove rules: key changes you need to be aware of in 2022

How to remove towels with baking soda

While some popular laundry stripping tutorials use borax, baking soda and white vinegar offer a non-chemical alternative with equally impressive results.

There is absolutely no need for detergent when stripping your bath towels. In fact, all you need is baking soda, distilled white vinegar, and a clean bathtub filled with hot water.

Fill your tub

Start by filling your bath with hot water and adding a cup of vinegar.

Fill the tub with your “clean” towels, keeping the lights, colors, and darks separate to prevent the colors from running.

Soak the towels

Allow towels to soak for up to four hours, allowing the water to take on a cloudy shade of gray or even black for darker wash loads.

When the water stops changing color, you’ll know it’s time to take the next step in stripping your laundry.

Drain and Repeat

After your towels have been soaked in the white vinegar solution for at least three hours, drain the water and repeat the process using three-quarters cup of baking soda instead of just one cup of white vinegar.

Leave to soak for another three to four hours and drain the water once it has stopped blackening.

Vinegar and baking soda “remove” old soap and fabric softener scum from your towels while leaving the fibers feeling fresh and soft.

DO NOT MISS :
Linen: how to fix “stiff” and “crunchy” towels [INSIGHT]
Health warning: your bath towel could lead to three fungal infections [REVEAL]
Ms Hinch fans share how not to wash towels – ‘they’re going to get mean’ [ANALYSIS]

16023909

Dry the towels

Towels will be soaked after the stripping process, so it’s important that you take the time to dry them properly to avoid any unpleasant musty smells.

Depending on whether you have access to a dryer or a clothesline, there are several ways to completely dry your stripped towels to reveal the cool, fluffy fabric.

Empty the towels in your washing machine

This is a good way to remove excess water from towels before using heat to dry them.

Simply toss wet towels into an empty machine and put them on a drain and spin cycle – (this usually takes about 10-15 minutes).

Once your towels have been drained, use a drying rack or clothesline to lay the towels flat and allow them to dry completely.

Air dry the towels

Ring out as much water as possible by hand or using a spin cycle before leaving your towels to air dry outside.

This will only work on a hot, sunny day, and you’ll need to do it early to give the towels enough time to dry.

Air-drying takes longer, but it provides the added benefits of a soft, crisp towel and that fresh-air scent once they’re ready to bring inside.

Use a warm drying cycle

This is the fastest way to dry your towels, but it’s essential that you remove as much water as possible before throwing them in the dryer.

Use a hot cycle to soften damp towels and remove them as soon as possible after they are dry.

Share.

About Author

Comments are closed.